In comparison to commonly used, spring loaded tension meters, the SEFAR Tensocheck 100 has significant performance improvements:
Measurements above 30 N/cm are displayed with 0.5 N/cm resolution. A finer resolution (0.2 N/cm) is used below this figure. SEFAR Tensocheck 100 enhances the reproducibility of the screen tension.
Wide display range
SEFAR Tensocheck 100 covers the range of 4 to 60 N/cm, making it valuable measurement tool for every application and mesh specification.
Optional control plate
An optional control plate is available for the SEFAR Tensocheck 100. The control plates come with certification required by ISO quality systems. The control plate allows customers to check calibration of their SEFAR Tensocheck 100 internally, in comparison to sending it out to an external calibration service provider.
The instrument comes with a zeroing plate for quick confirmation, or adjustment simply by pressing a button. This provides repeatable results every time you use the tension meter.
Large, digital display
The digits of the measured values are 10 mm in size, and appear on a clear, digital display that is highly legible even at a distance.
Selectable measurement units
Select between N/cm and millimeters at the touch of a button. The measuring options make SEFAR Tensocheck 100 usable anywhere in the world.
After three minutes without measurement activity, the device shuts itself off to conserve battery life.
SEFAR Tensocheck 100 can be used and operated without any special expertise.