United States
FS_FC_Healthcare_Diagnostics_Test strip 03
FS_FC_Fabricated Products_Semi-finished components
FS_FC_Fabricated Products_Ribbons 03 b
FS_FC_Healthcare_Water drop 03

Products for Diagnostic Test Strips


Sefar test strips are fast and reliable. Their homogeneous woven structure and hydrophilic surface allow excellent spreading and wicking, even for the smallest samples.

FS_FC_Healthcare_Diagnostics_Test strip 03
Thumbnail Border
FS_FC_Fabricated Products_Semi-finished components
Thumbnail Border
FS_FC_Fabricated Products_Ribbons 03 b
Thumbnail Border
FS_FC_Healthcare_Water drop 03
Thumbnail Border

Ribbons, stamped pieces, tape and dispenser products

Sefar has developed state-of-the-art manufacturing facilities to produce custom components to fit the most demanding requirements. All healthcare products are processed in our Class ISO 7 clean room.

Fabricated products

Tape & dispenser products

FS_FC_Fabricated Products_Semi-finished components

Fabrics can be combined with an adhesive layer which enables a cost-efficient and fast joining of the fabric piece to the test strip.
In addition the fabric can be welded together with a paper / membrane layer, eliminating subsequent joining processes.

Ribbons

FS_FC_Fabricated Products_Ribbons 03

Fabrics can be heat or ultrasonically slit. Ribbon width ranges from 7 mm to 2400 mm (heat slit) or from 4mm to 350 mm (US slit).

Stamped pieces

FS_FC_Fabricated Products_Stamped pieces 03

Sefar fabrics can be provided pre-cut in virtually any configuration by laser cutting, cold stamping or ultrasonic stamping.

Absorption and spreading

Hydrophilic fabric absorbs and spreads 5 µl of water

SEFAR MEDIFAB quality

Passes USP plastics class VI tests

Biocompatible according to ISO 10993

Pyrogen-free

Non-hemolytic, non-cytotoxic, low extractables

Precision monofilament fabrics having defined surface characteristics

Customer specific surface coatings available (including plasma)

Customer specific fabrication in a clean room class 7 (ISO 14644-1)

Raw materials comply with FDA 21 CFR 177

Raw materials used are polyester (PETP) and polyamide (PA)

Non-standard materials, e.g. polyetheretherketone (PEEK) or polypropylene (PP)
can be supplied in MEDIFAB quality upon request

ISO 13485 certified production processes

Validated washing and finishing process in accordance with GMP guidelines

ISO 9001 quality system and ISO 14001 environment management system


Additional information on our fabrication capabilities can be found by following the links below:


Download PDF Factsheet