United States

Newsletter

How about subscribing to our Newsletter?

svg_close_message
PS_US_Adhesive_Cyano2b
PS_US_Adhesive_ActStdGrd b
PS_US_Adhesive_2Part1 c
PS_US_Adhesive_ActStdGrd c

Screen Adhesives


Sefar offers two different types of screen adhesives. Both Cyanoacrylates and Two-Part Adhesives come in several different formulations, making it easy to find the right adhesive for your screen-making needs.

PS_US_Adhesive_Cyano2b
Thumbnail Border
PS_US_Adhesive_ActStdGrd b
Thumbnail Border
PS_US_Adhesive_2Part1 c
Thumbnail Border
PS_US_Adhesive_ActStdGrd c
Thumbnail Border
Cyanoacrylate adhesives, often known as “super glues”, are an adhesive system that consists of an acrylic resin which is rapidly cured by the presence of an accelerator or “activator” (although the adhesives will cure without the presence of an activator as well). With the help of an activator, cyanoacrylates set fast (in about five minutes), and the bond reaches full strength in two hours.

Selecting the right Cyanoacrylate

When selecting the correct cyanoacrylate adhesive for your application, it is important to match the mesh count and adhesive viscocity. Use the tables below as guides for cyanoacrylate selection.

PS_US_Adhesive_ChartSMA

Standard Cyanoacrylate Selection Table

Standard Grade Cyanoacrylate Adhesives


Sefar offers a range of private label cyanoacrylate adhesives for your shop with our SEFAR Mesh Adhesive line (SMA). The availability of low, medium and high viscosity adhesives insures a good match between adhesive and mesh specification. Use with Sefar’s standard activator product, SEFAR Activator.


PS_US_Adhesive_SMA100

SEFAR SMA 100

Low viscosity, standard grade cyanoacrylate adhesive designed for fine mesh counts between 230-460 threads per inch.


PS_US_Adhesive_SMA500

SEFAR SMA 500

Medium viscosity, standard grade cyanoacrylate adhesive designed for mid-range mesh counts between 175-305 threads
per inch.


PS_US_Adhesive_SMA1100

SEFAR SMA 1100

High viscosity, standard grade cyanoacrylate adhesive designed for coarse mesh counts between 83-255 threads per inch.


PS_US_Adhesive_ActStdGrd

SEFAR Activator

Standard grade aerosol activator, formulated for use with SEFAR Mesh Adhesives and Frame Fast adhesive products.



PS_US_Adhesive_ChartPrem

Premium Cyanoacrylate Selection Table

Premium Grade Cyanoacrylate Adhesives


Sefar carries Frame Fast cyanoacrylates for its premium grade screen making adhesives. Frame Fast adhesives are custom formulated to produce strong bonds of 3,000 psi in comparison to 1,200 psi yielded by standard market adhesives. They are highly affective with aluminum, steel or wood frames, and self-tensioning inserts.

Frame Fast cyanoacrylates are available in multiple viscosities in order to accommodate different mesh specifications and your individual screen-making needs.


PS_US_Adhesive_FF280

Frame Fast 280

Premium, clear, low viscosity formulation for fine mesh counts between 230-460 threads per inch.


PS_US_Adhesive_FFTG

Frame Fast Trade Grade

Premium, clear, medium viscosity formulation for mid-range mesh counts between 175-305 threads per inch.


PS_US_Adhesive_FF290

Frame Fast 290

Premium, clear, high viscosity formulation designed for coarse meshes between 83-255 threads per inch.


PS_US_Adhesive_FF295

Frame Fast 295

Flexible, black rubber-toughened formu- lation for the most demanding bonding applications when using fine mesh specifications between 230 to 460 threads per inch, high tensions, and minimal profile frames.


PS_US_Adhesive_Act303

Frame Fast Activator 303

Non-aerosol adhesive activator, completely free of ozone depleting chemicals. Use with all Frame Fast cyanoacrylate adhesives.


PS_US_Adhesive_Act304

Frame Fast Activator 304

Premium grade aerosol activator, also free of ozone depleting chemicals and has a reduced odor. Can be used with all Frame Fast cyanoacrylate adhesives.


Two-part adhesives consist of an adhesive base and a catalyst added to enhance the curing process and chemical resistance. Although excellent adhesives for securing the mesh to the frame, two-part adhesives can also be used as a frame primer and as a screen block-out (a permanent block-out). For use with most plastic, wood and metal surfaces.

The high shear strength and low peel strength of two-part adhesives make for durable bonds, and easy mesh removal when new screen fabric is necessary (leaving an excellent second-surface for subsequent bonds). Typically, two-part adhesives will take longer to cure than cyanoacrylates (see each product description for an estimate of cure time).

Selecting the right two-part adhesive

Two-part adhesives consist of an adhesive and a hardener catalyst that are mixed together in a specific ratio prior to mesh application. Once cured, two-part adhesives are typically considered more flexible in nature, and also have excellent solvent resistance. Most two-part adhesives work with the majority of mesh specifications - see table below.

PS_US_Adhesive_Chart2part

Two-Part Adhesive Selection Table


PS_US_Adhesive_301A

SEFAR 301A

A clear, two-part, medium viscosity adhesive for mesh counts up to 305 per inch. SEFAR 301A has a pot life of 24 hours when properly sealed, and cures between 5-15 minutes depending on adhesive/mesh thickness. Use with catalyst SEFAR Hardener D. Contains Methyl Ethyl Ketone (MEK).


PS_US_Adhesive_LS300

Frame Fast Liquid Staple 300

Two-part adhesive used for bonding coarse to fine mesh counts to wood, metal or plastic. The methylene chloride-free formulation has good solvent resistance, cures in 7-20 minutes, and has a pot life of 8-24 hours. Use with Liquid Staple Catalyst 855.


PS_US_Adhesive_LS850

Frame Fast Liquid Staple 850

Two-part adhesive used for bonding coarse to fine mesh counts to wood, metal or plastic with a 15-20 minute cure time. The adhesive has excellent solvent resistance, and a pot life between 1-5 days depending on the quantity of catalyst used. Use with Liquid Staple catalyst 855. Contains Methylene Chloride (MEC).


PS_US_Adhesive_LS870

Frame Fast Liquid Staple 870

Two-part adhesive used for bonding coarse to fine mesh counts to wood, metal or plastic. Methylene Chloride-free formulation has excellent solvent resistance, cures in 15-20 minutes, and has a pot life of 1-2 days. Use with Liquid Staple Catalyst 855.


PS_US_Adhesive_LS875

Frame Fast Liquid Staple Thinner 875

Liquid Staple Thinner 875 can be added to Liquid Staple 850 and 870 adhesives as a thinner to ascertain specific adhesive properties, or be used as a clean up solvent.



PS_US_Adhesive_FF400

Frame Fast 400 Debonder

Aggressively dissolves cured Frame Fast adhesives from work areas or skin in the event of accidental bonding. Not intended to be used for screen cleaning production. Only available in 8 oz. bottles.


PS_US_Adhesive_FF501

Frame Fast 501 Cured Adhesive Remover

Adhesive remover in semi-paste / gel formula that will dissolve both cured cyanoacrylate and two-part products. Excellent choice when multiple layers of adhesive need to be removed (eliminates frame grinding or sanding).


PS_US_Adhesive_FF505

Frame Fast Cyano-OFF! 505

This revolutionary biodegradable product is odorless, non-flammable, non-hazardous and reusable! Cyano-OFF! will remove Frame Fast cyanoacrylate adhesives from aluminum and steel frames by quickly softening the adhesive for easy removal-soak overnight for clean frames in the morning!


back

No contacts found

For general information concerning the Sefar Group feel free to contact the following address. Specific information on our screen printing or filtration solutions can be found by selecting Printing or Filtration in the navigation bar. Local information can be found by choosing your country in the drop-down list above the Sefar Logo.

To get into contact with you local Sefar representant choose your country in the following drop-down list.